strongSwan VPN Client
GPL-2.0-or-later · open source
Connect to a company, provider or self-hosted IKEv2/IPsec gateway with passwords, certificates, custom proposals and per-app split tunnelling.
Needs:Android 6.0+ · an IKEv2/IPsec VPN profile
2113 Apps is independent, not affiliated with or endorsed by the strongSwan VPN Client developers. Official sources: source code on GitHub.
- Version
- 2.6.3
- Size
- 27.1 MB
- Requires
- Android 6.0+
- Updated
- 2026-10-27
Screenshots





Introduction
strongSwan VPN Client connects Android to IKEv2/IPsec gateways. It is useful when a workplace, commercial provider or server you control gives you an IKEv2 profile; the app does not sell a subscription, create an account or include public VPN servers.
Profiles and routing
- Authenticate with an EAP username and password, a client certificate, certificate plus EAP, EAP-TLS or EAP-TNC, depending on the gateway.
- Set custom IKE and ESP cryptographic proposals when the server needs something other than the defaults.
- Configure DNS servers, MTU, port, proxy address and exclusions, NAT keepalive and IPv6 transport.
- Choose which installed apps use or bypass the tunnel, and separately block IPv4 or IPv6 traffic that is not sent through the VPN.
- Deploy profiles and certificates through Android managed configuration on administered devices.
Version 2.6.3 focuses on roaming between networks. When a phone joins Wi-Fi, Android can keep the mobile network connected for a while, so the events strongSwan relied on to notice the switch could arrive late or not at all. This release also triggers roaming when a network’s capabilities or link properties change, and waits slightly longer so several changes can be handled together. The preceding releases added edge-to-edge interface work and fixed the app-selection layout, plus explicit ML-KEM configuration and an EAP-MSCHAPv2 security fix.
What goes online
The tunnel goes to the gateway in the profile. The client has no built-in service to choose for you. Android’s VPN permission lets it route selected device traffic; the exact sites and DNS servers visible to the gateway depend on the profile and routing settings. Certificate revocation checks are enabled by default, so OCSP or CRL addresses named in the gateway’s certificates may also be contacted. Our scan found no recognised tracker SDKs.
About this file
- This is F-Droid’s build of strongSwan VPN Client 2.6.3, compiled from the published source and signed with F-Droid’s key. It cannot update a copy signed by the developer or another store without uninstalling that copy first.
- The 27.1 MB APK runs on Android 6.0 or later and includes native libraries for ARM and x86, 32- and 64-bit. Its ten permissions cover internet and network state, the VPN foreground service, notifications, reading the installed-app list for per-app routing, legacy file import, requesting exemption from battery optimisation and an overlay used when Android 14 or later starts a VPN from the Quick Settings tile.
- Our scan found no tracker libraries.
- The client and strongSwan code are licensed under GPL-2.0-or-later. The source for this build is available from F-Droid and the strongSwan project.
What’s inside the APK
Trackers
No code matching the tracker signatures we check, including Exodus Privacy’s list and our published supplements.
Native code
Runs on 64-bit and older 32-bit ARM phones.
Android versions
Built for Android 16 (target API 36).
Permissions
2 of them need your approval first.
CPU types in this build: arm64-v8a (64-bit ARM, almost every phone since 2017); armeabi-v7a (32-bit ARM, older and budget phones); x86 (32-bit Intel, emulators); x86_64 (64-bit Intel, emulators and Chromebooks).
Asks you first (2)
Android shows a prompt before the app can use these.
- Show notifications (Android 13+) · POST_NOTIFICATIONS
- Read shared storage (Android 12 and older) · READ_EXTERNAL_STORAGE
You switch these on in Settings (1)
Special app access. Nothing is granted until you turn it on yourself.
- Display over other apps · SYSTEM_ALERT_WINDOW
Granted at install (6)
Low-risk permissions Android grants automatically, plus any we have not classified.
- ACCESS_NETWORK_STATE
- FOREGROUND_SERVICE
- FOREGROUND_SERVICE_SPECIAL_USE
- INTERNET
- QUERY_ALL_PACKAGES
- REQUEST_IGNORE_BATTERY_OPTIMIZATIONS
Defined by other apps (1)
Permissions that belong to another app or to this app itself.
- org.strongswan.android.DYNAMIC_RECEIVER_NOT_EXPORTED_PERMISSION
More Information
- Package name
- org.strongswan.android
- Version
- 2.6.3 (build 100)
- File size
- 27.1 MB (27,051,395 bytes)
- Requires
- Android 6.0 or later
- Category
- Network & Privacy
- License
- GPL-2.0-or-later
- Source code
- github.com/strongswan/strongswan
- Released
- Oct 27, 2026
- Signed by
- F-Droid, which built this APK from the published source code. Because the key is F-Droid’s, it won’t install over a copy from Google Play or GitHub (or the other way round) without uninstalling first.
- Signer SHA-256
- fbedb4835370c80d553cb48eecb329f5127287d83ab0f5ddbba3b084c5fcde91
- File SHA-256
- 205c60cf9d1f9591e757ff96d7a7d63207fe29a3d92041012c864bb10ab781c9
- Checked
- , against the F-Droid index · how we check · verify it yourself
Common questions
Is this APK the official strongSwan VPN Client release?
It is F-Droid’s build rather than the developer’s own: F-Droid compiled strongSwan VPN Client 2.6.3 from the published source code and signed it with its own key. Its SHA-256 matches F-Droid’s signed index. Because the key is F-Droid’s, it won’t install over a copy from Google Play or GitHub without uninstalling first.
What Android version does strongSwan VPN Client need?
Android 6.0 or later (API level 23). Version 2.6.3 is built for Android 16 (target API 36). Runs on 64-bit and older 32-bit ARM phones.
Can strongSwan VPN Client access the internet?
Yes. The APK requests Android’s internet permission. In total it declares 10 permissions, and 2 of them need your approval first.
Does strongSwan VPN Client contain trackers?
No known trackers: our scan of version 2.6.3 found no code matching the tracker signatures it checks. Those include Exodus Privacy’s list and the published local supplements described on How We Check; the scan doesn’t show what data the app itself sends.
Is strongSwan VPN Client open source?
Yes. strongSwan VPN Client is released under the GPL-2.0-or-later licence, and its source code is published at https://github.com/strongswan/strongswan.
Does strongSwan include a VPN service or free servers?
No. It is a client. You need connection details and credentials from an employer, VPN provider or IKEv2/IPsec gateway that you administer.
Can it import a WireGuard or OpenVPN profile?
No. strongSwan implements IKEv2/IPsec. WireGuard and OpenVPN use different protocols and profile formats; use a matching client for those.
Which login methods are supported?
The fixed-version source offers EAP username/password, certificate-only, certificate plus EAP, EAP-TLS certificate and EAP-TNC username/password profiles. What works still depends on the gateway configuration.
Can an administrator deploy profiles?
Yes. The Android client supports managed configuration for profile settings and certificates. It also exposes advanced options such as IKE and ESP proposals, DNS, MTU, proxy, NAT keepalive and split tunnelling.
Recent releases
| Version | Released | Size | Requires |
|---|---|---|---|
| v2.6.3 · this download | Oct 27, 2026 | 27.1 MB | Android 6.0+ |
| v2.6.2 | Nov 3, 2025 | 16.0 MB | Android 5.0+ |
| v2.6.1 | Oct 30, 2025 | 16.0 MB | Android 5.0+ |
Versions currently kept in the F-Droid repository. We host and check only the newest one. Full changelog.
Alternatives and related apps
-
WireGuard Uses the smaller WireGuard protocol and needs a WireGuard configuration rather than an IKEv2 gateway.Download -
OpenVPN for Android For OpenVPN profiles, with detailed routing, certificate and per-app controls.Download -
Proton VPN Includes a consumer VPN service and account instead of only a client for a server you already have.Download